Scroll to take the tour
CUTLIST.io features seven shop tools, built right in.
Save time. Save material. No guesswork.
Optimized cutlists, simplified.
Let's begin.
The Setup Tab
Here we set our parameters. Work in inches or millimetres, enter your blade's kerf, and toggle a few options for setting up your workflow.
The Stock Tab
Enter your sheet or stock sizes and how many you have. Toggle stock related options here (if you missed them on the Setup tab).
The Parts Tab
Enter your parts' width, height and quantity, in fractions or decimals. If grain direction doesn't matter, let the engines rotate your parts when it helps save material.
Now it's time to Optimize.
One tap. Every part placed. CUTLIST.io lays it all out to scale, kerf included, before you make a single cut.
Pick a workflow.
Rip First
Rip full-length strips first, then crosscut to length. The table-saw workflow: leftover length gets re-ripped into parts, not scrap.
Crosscut First
Cut across the material first, rip it down second. Breaks a full sheet into bands you can actually handle, and every cut runs edge to edge.
Max Yield
No opinion on workflow, just the tightest fit the geometry allows: most parts, fewest sheets. Made for the CNC, where cut order doesn't matter.
And now our favorite.
Smart Stack
Blends the others, region by region. Dense layouts that still come apart with straight, edge-to-edge cuts on a saw. Tap "I'm feeling lucky" for a new layout.
Know every cut,
in order.
Rips and crosscuts on every sheet, showing how to break down your material.
Save layout
Save the layout and open it again on any device.
Print report
Print a cut report with every sheet and part, and take it to the saw.
That's the Cutlist Optimizer.
From sheet sizes to a printed cut report, in a few taps.
Now for the rest of the shop.
The Six QuickTools
Unit Converter, Tape Measulator, Board Foot Calculator, Quick Fill / Tile, Circle Glue-Up Calculator and Shaker Door Maker.
Unit Converter
Convert any length to any other: inches, feet, yards and miles, or millimetres, centimetres, metres and kilometres. Fractions welcome, so 4 1/2 in comes out as 114.3 mm.
Tape Measulator
Add, subtract, multiply and divide tape measurements, inches and metric mixed. Type 48" + 1.27 cm − 6.35 mm − 7/8" and read 47‑3/8" off a tape, with feet and inches and centimetres alongside.
Board Foot Calculator
Board feet and cost for a list of boards. Enter width, length, thickness (fractions or decimals), quantity and price per board foot, and it totals the stack.
Quick Fill / Tile
How many of one part fit on one sheet, kerf included. 24 doors at 11" × 15" from a 4' × 8', drawn as a grid.
Circle Glue-Up Calculator
Board lengths for a glue-up you'll cut into a circle. Each board covers the circle plus your trim allowance, rounded up to the nearest 1/4". Switch on Equal Width Compensation and every board finishes at the same width.
Shaker Door Maker
Stile, rail and panel sizes for a cabinet opening, with tongues and panel gap figured in. Overlay or inset, single door or a pair.
Add CUTLIST.io
to your Home Screen.
Works like a native app
Full screen, its own icon, no app store. On iPhone, tap Share, then Add to Home Screen. On Android, tap ⋮, then Add to Home screen.
More features coming soon.
— * as needed and requested.
Save time. Save material.
Your next cutlist is a minute away.
- All four optimization engines, unlimited layouts
- The full ToolBox: all six shop tools
- Saved projects and printed cutlists
Opens cutlist.io. Plan a real sheet in your browser, nothing to install.